Mamiya ZE-2 - Disassembly

l. Dis . and reassembly
Please always refer to diagrams of the ZE -2 parts catalog when dis.
and reassembing.
However, only sorne particular ones have been described here in the text.
1-1 Disassembly of front housing with mirror housing and viewfinder:
A. Disassembly
Primarily unsolder following leadwires by referring to the electro
circuit diaghrams.
l. From flexible PCB.
a. White, yellow and orange leadwi res from shutter
b. Purple leadwire from main SW
c. Green leadwire from reset SW
d. Orange readwire from battery house
c. Pink readwire between VR2 and VR3
f. Green (Output) and purple leadwires from manual PCB.
g. Green, brown and blue leadwires from selector PCB.
h. Red leadwire from shutter
i. Red leadwire from X synchro terminal
2. From selector PCB
a. Pale blue leadwire from main SW
b. Black leadwire from reset SW
c. Pale blue leadwire from battery house
d. Pink leadwire from manual PCB
e. Yellow leadwire from manual PCB
f. White leadwire from flexible PCB
3. From manual PCB
3 pes
1
1
1
1
2
3
1
1
1
1
1
1
1
1
a. Green, white, black, black and purple from flexible PCB S
Total 25 pes.
- 6-