Mamiya ZE-2 - Adjustment

. 7
23
. 24
3. Put the camera body on a sur -
face plate by facing the
bayonet rings downward.
(Fig. 25)
4. Measure four pointed places
A, B, C and D .
(Fig. 25)
Each
place should be in
tolerance 45.5 mm+0.02
- 0.05
B. Adjustment
l. Referring to the text "1-1",
remove the front housing with
mirror housing and focusing
screen frame from the camera
2.
body.
Adjustment is made by putt-
ing following washers 4W2x0.03,
0.05 or 0.1 required place
which are shown in Fig. 26.
Note: 1) Apply "patex" or
any other adhesive on
the place befare putt-
ing the washer.
2) The eight screws
must be tighten
sufficiently .
-21-
©
®
Fig.25
Fig.26