Mamiya ZE-2 - Page 3

e screw which has a mark of black circle dot on head of the its identification
-:.mlber is new type screw, so called "Tapping screw".
r example: • TB2 x 4 ----------Tapping screw
• Mll00-13771-
--- - --Tapping screw
te: Special attention should be payed to tightening the screw in order to avoid
marking oversized or broken hole.
:tention for cleaning up plastic parts of camera surface:
(1) Rub and wipe gently plastic parts with t i ssue paper or chamois without
moistening it in any cleaning fluid.
( 2) Sorne really stubborn dirt or grease?
You can use only "Benzine".
Moisten
tissue or chamois in benzine, and rub and wipe surfaces for
removing them, but never use any other fluids like alcohol, ether
and keton.
Otherwise it may cause fading and crack to the plastic surface.
-1-