Mamiya ZE-2 - Page 35

2. 2nd shutter blind does not run or shutter operates as bulb at M mode.
-
-
-
-
3. Shutter speeds are too slow and not
adjustable at M.
Yellow and white leadwires from
shutter - Short
ICS - No .S pin and yellow leadwire
land - Short
Green leadwire (output) and purple
leadwire in MPCB- Short
Black leadwire from MPCB
-Malsolder
Upper selector brush- Contact
efficiency and dirty
Yellow leadwire in selector P.C.
board -Malsolder
Contact efficiency of hot shoe earth
contact - Not enough
-
4. ShuttSr speed becomes slower at LV9 with top cover
Note: Be carefull not to pinch any leadwires when tightening
the selector.
-33-