Mamiya ZE-2 - Page 37

6. Buzzer does not sound at all
7. Buzzer does not sound a certain shutter speed.
(1)
Check
text "8- 4, B-2
(8) to (11)
in order
(2)
Red leadwire of pulsating
buzzer - Broken,
malsolder
(3)
Warning
signa! input pins
@CZ)® -Be
sunk
(4)
HIC - pattern - Broken, damage
(5) Gray, purple, blue leadwires - Broken,
malsolder
8. LED lights up on 1/1000 at M mode
(1)
Pink
leadwires- Malsolder
(2)
Brown leadwire from selector- Malsolder
(3)
Reverse
side brush of
selector -Contact efficiency
and dirty
9. LED does not light up at M and Auto.
10.
LED does not light up at M
(1)
Check
text "8-4
B-3" (12) to (15)
in order
(2)
Orange
leadwire from shutter
magnet - Short
(3)
Green
leadwire from
reset switch- Short
(4)
Pale blue leadwires
from selector and main
sw
- Malsolder
(5)
Purple leadwire
from menory SW. and Cl terminal
- Short
11. LED lights up at M, but not blinks
(1) HIC -
terminal @) ®-short
(2)
Brown leadwire
from selector and R7 terminal
- Short
-35-