Maintenance and care
100
Unscrew the oil filter cover (1) and remove it, to
gether with the oil filter insert (3).
Remove the oil filter insert (3) from the oil filter
cover. Remove the sealing ring (2) from the oil fil
ter cover.
Fit new sealing ring (2) to the filter cover (1).
Insert the new oil filter insert (3) into the oil filter
cover (1).
Insert the oil filter cover (1) in the oil module and
tighten to a torque of 40 Nm.
Changing the second oil filter insert takes place by
analogy.
1
2
3
1
2
3
To Next Page
Loading...
