EasyManuals Logo

Man D2862 LE433 User Manual

Man D2862 LE433
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Commissioning and operation
22
Commissioning
Before daily starting the engine, check fuel level, coolant level and engine oil level and replenish, if neces
sary.
Caution:
Use only approved fuels, lubricants etc. (see brochure Fuels, lubricants etc."). Otherwise the liab
ility for defects will become null and void!
Checking oil level
Check engine oil level only approx. 20 minutes
after the unit has been switched off.
DPull out dipstick (arrow)
D wipe it with a clean, lint-free cloth
D and push it in again up to the stop
D Pull out dipstick again
The oil level should be between the two notches in
the dipstick and must never fall below the lower
notch.
Caution:
Do not add so much engine oil that the oil
level rises above the max. marking on the
dipstick. Overfilling will result in damage
to the engine.
Ensure utmost cleanliness when handling fuels,
lubricants and coolants.
Oil
?
MIN
MAX

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Man D2862 LE433 and is the answer not in the manual?

Man D2862 LE433 Specifications

General IconGeneral
Engine ModelD2862 LE433
Bore128 mm
Stroke157 mm
Fuel TypeDiesel
Engine TypeV12
Displacement24.24 liters
Power Output882 kW
AspirationTurbocharged

Related product manuals