Maintenance and care
102
Pump off gearbox oil
Unscrew the sealing cap of the oil drainage hose
(1). Connect the suction line (2) of the oil drainage
pump to the oil drainage hose (1) of the gearbox.
With the installation hot after running, press the
“OIL OUT" button of the oil drainage pump and
pump all the used oil via the oil drainage hose (3)
into a container of adequate capacity.
Fill the gearbox with gear oil
Fill the gearbox with gearbox oil via the discharge
hose (3), by pressing the “OIL IN" button.
Caution:
Do not add so much gearbox oil that the
oil level rises above the max. marking on
the dipstick. Overfilling will result in dam
age to the gearbox!
Disconnect the suction line (2) of the oil drainage
pump from the oil drainage hose (1) of the gear
box. Screw on the sealing cap of the oil drainage
hose (1).
For gearbox oil filling quantity see documentation
of the gearbox manufacturer.
1
2
3
To Next Page
Loading...
Need help?
General
