Man D2862 LE433 User Manual

Commissioning and operation
39
Standard function: A reset signal is sent via the CAN bus to the engine monitoring and diagnostic
system control unit (engine terminal box) or to a data station. As long as the appropriate criteria
are fulfilled, the engine slow down or shutdown alarms arising are reset.
Additional function in the menu: Accept change and pass to the next parameter.
Function (Actuation for approx. 3 seconds): Switch-on and switch-off of the display (display only,
not on remote operation).
Additional display function (Brief actuation): Insertion of the info. display for approx. 5 seconds

Man D2862 LE433 Specifications

General

Engine Model	D2862 LE433
Bore	128 mm
Stroke	157 mm
Fuel Type	Diesel
Engine Type	V12
Displacement	24.24 liters
Power Output	882 kW
Aspiration	Turbocharged