Need help?Do you have a question about the M&C LA Series and is the answer not in the manual?
General| Brand | M&C |
|---|---|
| Model | LA Series |
| Category | Accessories |
| Language | English |
Product compliance with EMC, Low Voltage, and RoHS directives.
EU Declaration of conformity can be downloaded from M&C homepage.
Factory mounting of sensors into filters or flow chambers for complete units.
Step-by-step instructions for mounting LA1S sensor into a universal filter.
Step-by-step instructions for mounting LA1S sensor into the LS flow chamber.
Instructions for mounting LA25S sensor onto a universal filter.
Instructions for mounting LA25S sensor into the LS25 flow chamber.
Details on connecting power supply and sensors to the electronic controllers.
Electrical connection details for the LA1.1 electronic controller.
Electrical connection details for the LA1.4 electronic controller.
Instructions for making pneumatic connections for sample gas lines.
Initial steps to commission the unit with a dry sensor.
Procedures for testing sensor response and cable break detection.
Steps for adjusting sensor sensitivity for accurate alarming.
Configuration of the alarm hold function for manual reset.
To Next Page
