CHECK Steering *
CHECK Swivel pins
(MC 18-2)
CHECK Wheel reduction gear pivots (MC 18-4)
CHECK Rear axle *
CHECK Disc brake wear on wheel motors *
CHECK Condition of boom assembly *
CHECK Mast lifting chains *
CHECK Mast lifting chain pulleys *
CHECK Mast guide rollers *
CHECK Mast bearing rollers *
CHECK Thickness of the mast wearing plates *
CHECK Hydraulic circuit pressures *
CHECK Hydraulic circuit flow rates *
CHECK Bearings and bushings *
CLEAN/CHECK Hydraulic oil tank and strainer *
* Consult your dealer.
3 - 30
647635 (12/12/2017)
To Next Page
Loading...
