To Next Page

To Previous Page

3 - 333 - 33



F - EVERY 2000 HOURS SERVICEF - EVERY 2000 HOURS SERVICE

Carry out the operations described previously as well as the following operations.

F1 - CF1 - COOLOOLININGG LILIQUQUIDID

These operations are to be carried out if necessary or every two years at the beginning ofThese operations are to be carried out if necessary or every two years at the beginning of

winter. Park the lift truck on level ground with the I.C. engine stopped and cold.winter. Park the lift truck on level ground with the I.C. engine stopped and cold.

DRAINING THE LIQUIDDRAINING THE LIQUID

- Open the I.C. engine cover.- Open the I.C. engine cover.

- Place a container under drain plug - Place a container under drain plug 1 (fig. F1/1) of the radiator and drain plug 2 (fig. F1/2)1 (fig. F1/1) of the radiator and drain plug 2 (fig. F1/2)

of the I.C. engine block and unscrew the plugs.of the I.C. engine block and unscrew the plugs.

- Remove filler cap 3 (fig. F1/3) of the expansion pan 4 (fig. F1/3).- Remove filler cap 3 (fig. F1/3) of the expansion pan 4 (fig. F1/3).

- Let the cooling circuit drain entirely while ensuring that the ports do not get clogged.- Let the cooling circuit drain entirely while ensuring that the ports do not get clogged.

- Check the condition of - Check the condition of the hoses as well as the the hoses as well as the fastening devices and change the hosesfastening devices and change the hoses

if necessarif necessaryy..

- Rinse the circuit with clean water and use a cleaning agent if necessary.- Rinse the circuit with clean water and use a cleaning agent if necessary.

FILLING THE LIQUIDFILLING THE LIQUID

F1/1F1/1

F1/2F1/2



CONTENTSCONTENTS

https://www.forkliftpdfmanuals.com/