EasyManuals Logo
Home>Manitou>Forklifts>MLA 628 -120 LSU 3-E2 Series

Manitou MLA 628 -120 LSU 3-E2 Series User Manual

Manitou MLA 628 -120 LSU 3-E2 Series
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
1 - 171 - 17
22
11
F8F8
1
1
F9F9
11
F10F10
ININSTSTRRUCUCTITIONONSS FFOORR USUSEE AASS AA LLOOADADERER
A - LOADINGA - LOADING
You must not lift the boom if you have not checked the lateral trim of the forklift truck (see:
You must not lift the boom if you have not checked the lateral trim of the forklift truck (see:
INSTRUCTIONS FOR HANDLING A LOAD: D LATERAL TRIM OF THE FORKLIFT TRUCK).INSTRUCTIONS FOR HANDLING A LOAD: D LATERAL TRIM OF THE FORKLIFT TRUCK).
REMINDER: Make sure that the following operations can be performed with good visibilityREMINDER: Make sure that the following operations can be performed with good visibility
(see:(see: OPERATIOPERATING INSTRUCTIONS UNLADEN NG INSTRUCTIONS UNLADEN AND LADENAND LADEN: D – VISIBILITY).: D VISIBILITY).
FILLING THE BUCKETFILLING THE BUCKET
- Position the bottom of the bucket horizontally while scraping - Position the bottom of the bucket horizontally while scraping the ground (1) (fig. A1).the ground (1) (fig. A1).
- Move forwards slowly (2) and raise the boom (3) while tilting the bucket backwards (3)- Move forwards slowly (2) and raise the boom (3) while tilting the bucket backwards (3)
(fig. A1) to improve filling and lifting.(fig. A1) to improve filling and lifting.
- Reverse the forklift truck (1) very gently and carefully to release the bucket. Lower the- Reverse the forklift truck (1) very gently and carefully to release the bucket. Lower the
boom (2) to transport position (fig.A2).boom (2) to transport position (fig.A2).
Tilt the bucket backwards far enough to prevent any spillage and ensure its stability (loss of
Tilt the bucket backwards far enough to prevent any spillage and ensure its stability (loss of
product on braking).product on braking).
LOADING A TRAILERLOADING A TRAILER
- Approach the side of the trailer in transport position (fig. A3).- Approach the side of the trailer in transport position (fig. A3).
- Raise and extend the boom (1) (2) (fig. A4) until the bucket is over the trailer,- Raise and extend the boom (1) (2) (fig. A4) until the bucket is over the trailer,
3
3
33
22
11
A1A1
11
22
A2A2
A3A3
WARNINGWARNING
Do not raise the boom until you have first checked the level attitude of the lift truck (see : INS-Do not raise the boom until you have first checked the level attitude of the lift truck (see : INS-
TRUCTIONS FOR HANDLING A LOAD : D TRUCTIONS FOR HANDLING A LOAD : D - TRANSVERSE ATTITUDE OF THE LIFT TRUCK).- TRANSVERSE ATTITUDE OF THE LIFT TRUCK).
Tilt the bucket backwards far enough to prevent any spillage and ensureTilt the bucket backwards far enough to prevent any spillage and ensure
its stability (loss of product on braking).its stability (loss of product on braking).
WARNINGWARNING
CONTENTSCONTENTS
https://www.forkliftpdfmanuals.com/

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MLA 628 -120 LSU 3-E2 Series and is the answer not in the manual?

Manitou MLA 628 -120 LSU 3-E2 Series Specifications

General IconGeneral
BrandManitou
ModelMLA 628 -120 LSU 3-E2 Series
CategoryForklifts
LanguageEnglish

Related product manuals