To Next Page

To Previous Page

2 - 142 - 14

- Press the button 7 to reduce the pneumatic - Press the button 7 to reduce the pneumatic pressure.pressure.

1 - P1 - PNEUNEUMATMATICIC DRIDRIVERVER''SS SSEEAATT((OPTIONOPTION))

DESIGNED FOR MAXIMUM COMFORTDESIGNED FOR MAXIMUM COMFORT,, THIS SEATHIS SEAT CAN BE ADJUSTED AS FOLLOWS.T CAN BE ADJUSTED AS FOLLOWS.

WEIGHT AND SEAT HEIGHT ADJUSTMENTWEIGHT AND SEAT HEIGHT ADJUSTMENT

WEIGHT ADJUSTMENTWEIGHT ADJUSTMENT

It is advised that you adjust the seat according to your weight when sitting.It is advised that you adjust the seat according to your weight when sitting.

- Switch on lift truck ignition.- Switch on lift truck ignition.

- Push or pull lever 1 until green appears in display 2 indicating correct adjustment accor-- Push or pull lever 1 until green appears in display 2 indicating correct adjustment accor-

ding to your weight.ding to your weight.

NOTENOTE : T: To avoid any o avoid any health problems,health problems, it is recommended that it is recommended that the weight should be the weight should be chec-chec-

ked and adjusted before starting up the lift truck.ked and adjusted before starting up the lift truck.

SEAT HEIGHT ADJUSTMENTSEAT HEIGHT ADJUSTMENT

When weight adjustment When weight adjustment has been carried out,has been carried out, you can then modify you can then modify seat height.seat height.

- Keep the ignition switched on.- Keep the ignition switched on.

- Push or pull lever 1 until green appears and adjust the height of the seat while checking- Push or pull lever 1 until green appears and adjust the height of the seat while checking

that the green in display 2 remains visible.that the green in display 2 remains visible.

To avoid causing any damage, do not activate the compressor for over 1 minute.

ADJUSTMENT OF THE ANGLE OF THE BACK-RESTADJUSTMENT OF THE ANGLE OF THE BACK-REST

- S- Support the back-rest,upport the back-rest, pull the lever and position the back-repull the lever and position the back-rest to find the desired posi-st to find the desired posi-

tion.tion.

If you do not support the back-rest when making adjustments, it swings completely forwards.

LONGITUDINAL ADJUSTMENTLONGITUDINAL ADJUSTMENT

- Pull locking lever 1 - Pull locking lever 1 towards the right.towards the right.

- Slide the seat to the - Slide the seat to the required position.required position.

- Release the lever and be sure it - Release the lever and be sure it returns to the lock position.returns to the lock position.

To avoid causing any damage, do not activate the compressor for over 1To avoid causing any damage, do not activate the compressor for over 1

minute.minute.

IMPORTANTIMPORTANT

If you do not support the back-rest when making adjustments, it swingsIf you do not support the back-rest when making adjustments, it swings

completely forwards.completely forwards.

CAUTIONCAUTION



2 - S2 - SAAFEFETTYY BEBELTLT

- Sit correctly on the seat.- Sit correctly on the seat.

- Check that seat belt is not twisted.- Check that seat belt is not twisted.

- Place the seat belt at hip level.- Place the seat belt at hip level.

- Attach the seat belt and check that it locks.- Attach the seat belt and check that it locks.

- Adjust the seat belt to your body shape without squeezing your hip and without over-slack.- Adjust the seat belt to your body shape without squeezing your hip and without over-slack.

In no event should the lift truck be used if the seat belt is defective.

3 - C3 - CONONTRTROLOL AANNDD SISIGNGNALAL LILIGHGHTSTS PPAANNEELL

CONTROL INSTRUMENTSCONTROL INSTRUMENTS

A - HOURMETER AND REV COUNTERA - HOURMETER AND REV COUNTER

B - I.C. ENGINE WATER TEMPERATUREB - I.C. ENGINE WATER TEMPERATURE

TTeemmppeerraattuurre e zzoonnee BB1 1 - - BBlluue e zzoonne e ((3322°°F F - - 112222°°FF))

B2 - Green zone (122°F - 212°F)B2 - Green zone (122°F - 212°F)

B3 - Black/red zone (212°F - 221°F)B3 - Black/red zone (212°F - 221°F)

B3B3

B4B4

B2B2B1B1B1B1



Do not operate the Do not operate the lift truck with a defective seat belt lift truck with a defective seat belt (fixing, locking, cuts,(fixing, locking, cuts,

tears, etc.). Repair or replace the seat belt immediately.tears, etc.). Repair or replace the seat belt immediately.

WARNINGWARNING

CONTENTSCONTENTS

https://www.forkliftpdfmanuals.com/