To Next Page

To Previous Page

1 - 181 - 18

Raise and extend the boom (1) (2) (fig. A4) until the bucket is over the trailer, Raise and extend the boom (1) (2) (fig. A4) until the bucket is over the trailer,

keeping an eye on the load. Move the forklift truck (3) forwards very gently andkeeping an eye on the load. Move the forklift truck (3) forwards very gently and

carefully so that the load is tipped out into the center of the trailer. Put on thecarefully so that the load is tipped out into the center of the trailer. Put on the

handbrake and set the reverse lever to neutral.handbrake and set the reverse lever to neutral.

- Slowly tip out the product - Slowly tip out the product (4).(4).

- Tilt the bucket backwards (1) (fig. A5) and reverse the forklift truck (2) gently and- Tilt the bucket backwards (1) (fig. A5) and reverse the forklift truck (2) gently and

carefully.carefully.

- Retract (3) and lower the boom (4) into transpor- Retract (3) and lower the boom (4) into transport position (fig. A5).t position (fig. A5).

B - FILLINGB - FILLING

- Position the bottom of the bucket horizontally while scraping the ground (1) (fig.- Position the bottom of the bucket horizontally while scraping the ground (1) (fig.

B1).B1).

- Move slowly forwards (2) once the buc- Move slowly forwards (2) once the bucket is full,ket is full, it will act as a levelling blade.it will act as a levelling blade.