1 - 111 - 11
INSTRUCTIONSINSTRUCTIONS
- Park the lift truck on flat groun- Park the lift truck on flat ground or on an incline lower thad or on an incline lower than 15n 15 %.%.
- Place the forward/reverse lever in neutral.- Place the forward/reverse lever in neutral.
- Apply the parking brake.- Apply the parking brake.
- For lift trucks with gearboxe- For lift trucks with gearboxes,s, place the gear lever in neutral.place the gear lever in neutral.
- Retract entirely the boom.- Retract entirely the boom.
- Lower the forks or attachment to rest on the ground.- Lower the forks or attachment to rest on the ground.
- When using an attachme- When using an attachment with a grab or jawsnt with a grab or jaws,, or a bucket with hor a bucket with hydraulic opening,ydraulic opening, close the attachment fuclose the attachment fully.lly.
- Bef- Before stopping the lift truck after ore stopping the lift truck after a long working period,a long working period, allow the I.C. engine to allow the I.C. engine to idle for a few momentsidle for a few moments,, to allow the coolantto allow the coolant
liquid and oil to lower the temperature of the I.Cliquid and oil to lower the temperature of the I.C. engine and transmission. Do not forget this pre. engine and transmission. Do not forget this precaution,caution, in the event of frequentin the event of frequent
stops or warm stalling of the I.C. engine,stops or warm stalling of the I.C. engine, or else the temperature of certain paror else the temperature of certain parts will rise significantly due to the stopping of thets will rise significantly due to the stopping of the
cooling system,cooling system, with the risk owith the risk of badly damaging sf badly damaging such parts.uch parts.
- Stop the I.C. engine with the ignition switch.- Stop the I.C. engine with the ignition switch.
- Remove the - Remove the ignition key.ignition key.
- Lock all the access- Lock all the accesses to the lift truck (doorses to the lift truck (doors,, windowwindows,s, cowlscowls…).…).
H - DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAYH - DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAY
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
- Operators driving on the public highway must comply with current highway code legislation.- Operators driving on the public highway must comply with current highway code legislation.
- The lift truck must comply with current road legislation. If necessary,- The lift truck must comply with current road legislation. If necessary, there are optional solutions. Contact your dealerthere are optional solutions. Contact your dealer..
INSTRUCTIONSINSTRUCTIONS
- Make sure the - Make sure the revolving light is in place,revolving light is in place, switch it on and verify its switch it on and verify its operation.operation.
- Check the good working order and cleanness of lights,- Check the good working order and cleanness of lights, indicators and windscreen wiperindicators and windscreen wiper..
- Switch off the working headlights if the lift truck is fitted with them.- Switch off the working headlights if the lift truck is fitted with them.
- Retract entirely the boom and put the attachment at 12 in. from the ground.- Retract entirely the boom and put the attachment at 12 in. from the ground.
- For lift tru- For lift trucks with gearcks with gearboxesboxes ::
On the road,On the road, set off in 3rd gear and go into 4th (as per model of lift truck) when the conditions and state of the road allow. Inset off in 3rd gear and go into 4th (as per model of lift truck) when the conditions and state of the road allow. In
hilly areas,hilly areas, set off in 2nd gear and go into 3rd when the conditions and state of the road allow.set off in 2nd gear and go into 3rd when the conditions and state of the road allow.
Never move in neutral (gear reverser or gear lever in neutral or transmission cut-off button pressed) to preserve the lift truck engine brake.
Never move in neutral (gear reverser or gear lever in neutral or transmission cut-off button pressed) to preserve the lift truck engine brake.
Failure to respect this instruction on a slope will lead to excessive speed which may make the lift truck uncontrollable (steering, brakes)Failure to respect this instruction on a slope will lead to excessive speed which may make the lift truck uncontrollable (steering, brakes)
and may cause severe mechanical damage.and may cause severe mechanical damage.
Do not allow the lift truck to coast in neutral (using either the forward/reverse lever, gear shift lever or transmissionDo not allow the lift truck to coast in neutral (using either the forward/reverse lever, gear shift lever or transmission
cut-off button). Coasting on a slope will lead cut-off button). Coasting on a slope will lead to excessive speed which may make to excessive speed which may make the lift truck uncontrollable (steering,the lift truck uncontrollable (steering,
brakes) and may cause serious mechanical damage.brakes) and may cause serious mechanical damage.
DANGERDANGER
CONTENTSCONTENTS
To Next Page
Loading...
Need help?
General