EasyManuals Logo
Home>Manitou>Forklifts>MLA 628 -120 LSU 3-E2 Series

Manitou MLA 628 -120 LSU 3-E2 Series User Manual

Manitou MLA 628 -120 LSU 3-E2 Series
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
2 - 162 - 16
- F- Faulty operaaulty operationtion : : All leds and sound alarm function intermittently (paAll leds and sound alarm function intermittently (park the lift truck and consult your dealerrk the lift truck and consult your dealer,, never attempt anever attempt a
repair yourself).repair yourself).
A - LEDS (VISUAL ALARM) (FIG. A)A - LEDS (VISUAL ALARM) (FIG. A)
A1 - 4 green leds : There is a large reserve of longitudinal stability.A1 - 4 green leds : There is a large reserve of longitudinal stability.
A2 - 2 yellow leds : The lift truck is approaching the limit of longitudinal stability,A2 - 2 yellow leds : The lift truck is approaching the limit of longitudinal stability,
move carefully.move carefully.
A3 - 1 red led : The lift truck is very near at the limit of longitudinal stability. TheA3 - 1 red led : The lift truck is very near at the limit of longitudinal stability. The
alarm sounds simultaneously with a slow intermittent sound.alarm sounds simultaneously with a slow intermittent sound.
Move very Move very carefullycarefully..
A4 - A4 - 1 red 1 red led : led : The lift truck is at the authorized limit of longitudinal stabilityThe lift truck is at the authorized limit of longitudinal stability. The. The
alarm sounds simultaneously with a speed intermittent sound.alarm sounds simultaneously with a speed intermittent sound.
Only make de-aggravating hydraulic movements in the followingOnly make de-aggravating hydraulic movements in the following
order ; retract and raise the boom.order ; retract and raise the boom.
B - SOUND ALARM SWITCH (FIG. A)B - SOUND ALARM SWITCH (FIG. A)
Used to switch off the sound alarm when using the lift truck with loading and earUsed to switch off the sound alarm when using the lift truck with loading and earth movingth moving
buckets. When it is sbuckets. When it is switched off,witched off, the red led B1 indicates that the the red led B1 indicates that the sound alarm has beensound alarm has been
cut off and only tcut off and only the visual alarm is working. Under other operating che visual alarm is working. Under other operating conditions,onditions, the soundthe sound
alarm must be switched on.alarm must be switched on.
C - TEST SWITCH (FIG. A)C - TEST SWITCH (FIG. A)
Press the switch to verify at any time that the longitudinal stability alarm is working.Press the switch to verify at any time that the longitudinal stability alarm is working.
NOTE : This test does not verify that the alarm is correctly set ; this must be checked atNOTE : This test does not verify that the alarm is correctly set ; this must be checked at
every periodic service.every periodic service.
- Correct operation- Correct operation : All leds and the so: All leds and the sound alarm function continuouslyund alarm function continuously..
- Faulty - Faulty operationoperation : All leds a: All leds and the sound alarm function nd the sound alarm function intermittently (park the lift truckintermittently (park the lift truck
and consult your dealerand consult your dealer,, never attempt a repair ynever attempt a repair yourself).ourself).
D - STRAIN GAUGE (FIG. B)D - STRAIN GAUGE (FIG. B)
Disassembly or adjustment of the strain gauge is prohibited, this must only be done by spe-
Disassembly or adjustment of the strain gauge is prohibited, this must only be done by spe-
cially trained personnel, consult your dealer.cially trained personnel, consult your dealer.
AA
BB
A2A2
A1A1
A1A1
A1A1
A1A1
A2A2
A3A3
A4A4
AA
BB
B1B1
CC
DD
5 - S5 - SWIWITCTCHEHESS PAPANENELL
A - WORKING HEAD LIGHTA - WORKING HEAD LIGHT
B - OPTION BOOM HEAD LIGHTB - OPTION BOOM HEAD LIGHT
C - WORKING TAIL LIGHTC - WORKING TAIL LIGHT
D - WARNING LIGHTSD - WARNING LIGHTS
This switch enables the L.H. This switch enables the L.H. and R.H. Indicators to be and R.H. Indicators to be switched on simultaneouslyswitched on simultaneously,, withwith
the ignition off. The signal lithe ignition off. The signal light indicates that the switch is being ght indicates that the switch is being used.used.
E - OPTION REAR WINDOW DEFROSTINGE - OPTION REAR WINDOW DEFROSTING
F - FRONT WINDSCREEN WIPERF - FRONT WINDSCREEN WIPER
G - FRONT WINDSCREEN WASHERG - FRONT WINDSCREEN WASHER
H - OPTIONH - OPTION
I - OPTIONI - OPTION
- OPTION Electrovalve on boom head.- OPTION Electrovalve on boom head.
- OPTION Attachment hydraulic locking device.- OPTION Attachment hydraulic locking device.
- OPTION Electrical boom provision.- OPTION Electrical boom provision.
- OPTION Electrovalve on - OPTION Electrovalve on boom head +boom head + attachment hydraulic locking deattachment hydraulic locking device.vice.
A B C DA B C D
EE FF GG
CONTENTSCONTENTS
https://www.forkliftpdfmanuals.com/

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou MLA 628 -120 LSU 3-E2 Series and is the answer not in the manual?

Manitou MLA 628 -120 LSU 3-E2 Series Specifications

General IconGeneral
BrandManitou
ModelMLA 628 -120 LSU 3-E2 Series
CategoryForklifts
LanguageEnglish

Related product manuals