EasyManua.ls Logo

Manitou MLA 628 -120 LSU 3-E2 Series - Page 76

Manitou MLA 628 -120 LSU 3-E2 Series
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 302 - 30
4 - P4 - PREHREHEATEATININGG RODROD
Enables the motor unit to be kept warm during prolonged periods of stoppage and thus,Enables the motor unit to be kept warm during prolonged periods of stoppage and thus,
ensures the improved start-up of the I.C. engine.ensures the improved start-up of the I.C. engine.
SUPPLY CHARACTERISTICS OF PREHEATING SYSTEM :SUPPLY CHARACTERISTICS OF PREHEATING SYSTEM :
• Rated range of power : 110-120V ; 50-60Hz• Rated range of power : 110-120V ; 50-60Hz
• Current consumed : 4,5A• Current consumed : 4,5A
• Equipment in class 1• Equipment in class 1
• Category of insulation 2Category of insulation 2
ENVIRONMENTENVIRONMENTAL CONDITIONS IN AL CONDITIONS IN USE :USE :
• Maximum ambient temperature for using preheating : 77° F• Maximum ambient temperature for using preheating : 77° F
• Pollution level 2• Pollution level 2
CONDITIONS FOR CONNECTION AND USE OF CONDITIONS FOR CONNECTION AND USE OF PREHEAPREHEATING :TING :
- The preheating system should not be used for an external ambient temperature higher than 77° F.- The preheating system should not be used for an external ambient temperature higher than 77° F.
- It is essential that the power supply to the preheating system is :- It is essential that the power supply to the preheating system is :
• Effected with a cable that conforms to the installation standards in force and contains a protective earth conductor.Effected with a cable that conforms to the installation standards in force and contains a protective earth conductor.
• Contains an appropriate sectioning system.• Contains an appropriate sectioning system.
Incorporates an appropriate safety system against short circuits (fuses or circuit breaker) and a differential circuit brea-Incorporates an appropriate safety system against short circuits (fuses or circuit breaker) and a differential circuit brea-
ker with ker with 30mA sensitivity.30mA sensitivity.
- Only connect to and disconnect from the power supply while the unit is off and the I.C. engine is stopped.- Only connect to and disconnect from the power supply while the unit is off and the I.C. engine is stopped.
5 - E5 - ELECLECTRTRICIC SOCSOCKETKET12V12V
6 - E6 - ELECLECTRTRICICALAL BOBOOMOM PROPROVISVISIONION
Enables an electrical function to be used at the head of the boom.Enables an electrical function to be used at the head of the boom.
FUNCTIONINGFUNCTIONING
MLA 628 -120 LSU POWERSHIFT Series 3-E2MLA 628 -120 LSU POWERSHIFT Series 3-E2
- Hold button 1 down and move button 2 up or down.- Hold button 1 down and move button 2 up or down.
NOTE : Switch 3 enables the function controlled byNOTE : Switch 3 enables the function controlled by
button 1 to be locked. Indicator 4 lights up tobutton 1 to be locked. Indicator 4 lights up to
show when it is in use.show when it is in use.
7 - H7 - HYDYDRARAULULICIC ATATTATACHCHMEMENTNT LOCKLOCKINGING
33
44
22
11
CONTENTSCONTENTS
https://www.forkliftpdfmanuals.com/

Related product manuals