3 - 213 - 21
D8 - CHECK, CLEAN AND LUBRICATE THE MAST
LIFTING CHAINS
- Wipe the mast lifting chains 1 (Fig. D8) with a clean, lint-free cloth, then
examine them closely so as to detect any signs of wear.
- Vigorously brush the chains to get rid of any foreign matter, with a hard
nylon brush and clean diesel fuel.
- Rinse the chains by means of a paint brush impregnated with clean diesel
fuel and dry them with a compressed air jet.
- Moderately lubricate the chains with a paint brush impregnated with oil (See
chapter : LUBRICANTS AND FUEL in paragraph : 3 - MAINTENANCE).
- Remove the excess of oil with a clean cloth on the full length of the mast
lifting chains.
In case of technical faults, consult your dealer.
To Next Page
Loading...
