Manitou MSI25 T 4ST3A User Manual

E6 – SEAT BELT
CHECK

IMPORTANT

In no event should the lift truck be used if the seat belt is defective (fixing, locking, cuts, tears, etc.).
Repair or replace the seat belt immediately.
SEAT BELT WITH TWO ANCHORING POINTS
- Check the following points:
• Fixing of the anchoring points on the seat.
• Cleanness of the strap and the locking mechanism.
• Triggering of the locking mechanism.
• Condition of the strap (cuts, curled edges).
REELED SEAT BELT WITH TWO ANCHORING POINTS
- Check the points listed above together with the following points:
• The correct winding of the belt.
• Condition of the reel guards.
• Roller locking mechanism when the strap is given a sharp tug.
NOTE: After an accident, replace the seat belt.
3 - 24
647468 (26/11/2018)
M
SI 25/30/35 ... 4ST3A ; MH 25-4 ... 4ST3A

Manitou MSI25 T 4ST3A Specifications

General

Load Capacity	2500 kg
Lift Height	3300 mm
Engine Power	36.5 kW
Transmission	Hydrostatic
Power type	Diesel
Rated capacity	2500 kg
Load center	500 mm
Lifting height	3300 mm
Fork length	1200 mm
Power Source	Diesel
Tire Type	Pneumatic
Battery Voltage	12 V