11
R7 EXPERT / PRO SERVICE GUIDE
7
8
Install air spring assembly into
stanchion. Rotating clockwise,
start the end cap threads by hand
to prevent cross-threading. Using
a 22mm crow’s foot and torque
wrench, torque to
80-100 in lb [9.0-11.3 N m].
AIR SPRING SERVICE
Install air spring top cap into
stanchion. Torque to 60-80 in lbs
[6.8-9.0 N m].
Make sure to apply top down force
on the tool to prevent slipping.
NOTICE
To Next Page
Loading...
