To Next Page

To Previous Page

Part Number 000015432 Rev02 5/21 35

Step 6 Refer to chart and premix the correct solution

of cleaner/descaler and cool water.

Model Amount of Cleaner/Descaler

Part Number 000000084

Amount of

Water

CNF0201 CNF0202 2 oz (60 ml) 32 oz (1 liter)

Step 7 Remove the top cover from the ice chute and

pour the cleaner/descaler and water solution into the

evaporator. Add the entire amount of premixed solution

(excess solution will exit through the overflow tube in the

water reservoir).

Step 8 Replace the ice chute cover and allow the ice

machine to stand for 30 minutes.

Step 9 Turn on the water supply to the ice machine.

Step 10 Move the toggle switch to the ICE position. The

compressor will energize and produce ice with the cleaning

solution.

Step 11 The ice machine will freeze and discharge the

descaler/water solution into the bin. Allow the cycle to run

for 15 minutes.

NOTE: Discard all ice produced during the process.

Descaling and sanitizing must be performed on adjacent

surface areas not contacted by the water distribution

system. Refer to “Component Disassembly for Descaling

and Sanitizing” on page 38 - Disassemble, descale and

sanitize the ice machine a minimum of once every six

months.

Manitowoc CNF0201 User Manual

Questions and Answers: