Grove Published 3-25-2020, Control # 595-10 5-23
GRT8100 OPERATOR MANUAL MAINTENANCE AND LUBRICATION
88
Retract Cable
Sheaves
Figure<$pa
ranum>
&
Figure<$pa
ranum>
A
Until grease
extrudes
250 hours or 3 months
• 4 grease fittings
• Extend Tele 2 to
125.3 FT, so the
access holes
line up with the
grease fittings.
NOTE: Lubricate items more frequently than interval in table if environmental conditions and/or operating conditions
require.
CAUTION: Do not apply excessive pressure or force when greasing wear pads. This can cause grease fitting to separate
from wear pad. Only apply grease until resistance is felt.
To Next Page
Loading...
