OPERATOR MANUAL
This manual has been prepared for and is considered part of -
GRT880
Crane Model Number
This Manual is divided into the following sections:
SECTION 1 INTRODUCTION
SECTION 2 SAFETY INFORMATION
SECTION 3 OPERATING CONTROLS AND PROCEDURES
SECTION 4 SET-UP AND INSTALLATION
SECTION 5 MAINTENANCE AND LUBRICATION
NOTICE
The crane serial number is the only method your distributor or the factory
has of providing you with correct parts and service information.
The crane serial number is identified on the builder’s decal attached to the
operator cab. Always furnish crane serial number when ordering parts
or communicating service problems with your distributor or the factory.
An untrained operator subjects himself and others to death or
serious injury. Do not operate this crane unless:
• You are trained in the safe operation of this crane. Grove is not
responsible for qualifying personnel.
• You read, understand, and follow safety and operating
recommendations contained in the crane manufacturer’s manuals and
load charts, your employer’s work rules, and applicable government
regulations.
• You are sure all safety signs, guards, and other safety features are in
place and in proper condition.
• Operator Manual and Load Chart are in the holder provided on crane.
DANGER
© 2019 Grove U.S. L.L.C.
Published 3-25-2020, Control # 643-04
To Next Page
Loading...
Need help?
General
