Manitowoc Grove RT540E - User Manual

OPERATOR MANUAL
Supplement
Crane Warm-up Procedures
An untrained operator subjects himself and others to death or
serious injury. Do not operate this crane unless:
• You are trained in the safe operation of this crane. Manitowoc is not
responsible for qualifying personnel.
• You read, understand, and follow the safety and operating
recommendations contained in the crane manufacturer’s manuals and
load charts, your employer’s work rules, and applicable government
regulations.
• You are sure that all safety signs, guards, and other safety features are
in place and in proper condition.
• The Operator Manual and Load Chart are in the holder provided on
crane.
DANGER
!
© 2017 Manitowoc
Published 3-30-2017, Control # 516-04
Reference Only

Manitowoc Grove RT540E Specifications

General

Brand	Manitowoc
Model	Grove RT540E
Category	Construction Equipment
Language	English

Summary

Crane Warm-up Procedures

Engine Warm-up

Procedures for warming up the engine before operation.

Transmission Warm-up

Warm-up procedures for the crane's transmission.

Hydraulic Oil System Warm-up

Operating limits and warm-up for the hydraulic oil system.

Introduction and Specifications

General Crane Description

Overview of the RT540E Grove crane's features and design.

List of Specifications

Detailed technical specifications for the crane's components.

Safety Information

Safety Messages and Signal Words

Explains safety messages, alert symbols, and signal words.

Operator Qualifications

Defines qualified personnel and required crane operator qualifications.

Rated Capacity Limiter (RCL) Systems

Information on RCL systems, their function, and importance.

CRANE STABILITY;STRUCTURAL STRENGTH

Ensuring crane stability and structural integrity for safe operation.

Operating Controls and Procedures

Controls and Indicators

Overview of all controls and indicators in the crane cab.

Pre-Starting Checks

Essential checks before starting the crane for the day's work.

COLD WEATHER OPERATION

Recommendations for operating the crane in cold temperatures.

Traveling - General

General guidelines and precautions for traveling the crane.

Crane Control System (CCS) and RCL

CCS Operation Display

Explanation of the CCS main operating screen and its indicators.

RATED CAPACITY LIMITER (RCL) SYSTEM

Details on the function and setup of the Rated Capacity Limiter system.

Set-up and Installation Procedures

Installing Cable on the Hoist

Procedures for installing the hoist cable onto the hoist drum.

ANTI TWO BLOCK (A2 B) SWITCH

Information on the Anti Two Block switch and its operation.

ERECTING AND STOWING THE BOOM EXTENSION

Step-by-step instructions for erecting and stowing the boom extension.

Lubrication

STANDARD LUBRICANTS

Table of recommended standard lubricants for crane components.

ARCTIC CONDITIONS

Fluid and lubricant recommendations for extreme cold temperatures.

Steering and Suspension Lubrication

Lubrication points and intervals for steering and suspension components.

Maintenance Checklist

Daily or 10 Hour Check List

List of essential daily inspection and maintenance checks.

Weekly or 50 Hour Check List

Periodic inspection and maintenance checks for every 50 hours.