Manitowoc Grove GRT880 User Manual

Grove Published 3-25-2020, Control # 643-04 3-27
GRT880 OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
3
Set Counterweight
When rigging is complete, toggle clockwise to exit the
outrigger position and move on to setting the counterweight.
Toggle clockwise and select the counterweight icon.
Available choices display on the right of the screen.
NOTE: When the RCL Override Icon (1) is flashing, it
means the override switch was active at crane
startup. In this case override is NOT active. To
override the RCL, turn switch OFF for 1 second
then ON again. The RCL will be bypassed.
Set Boom
Turn jog dial clockwise to set boom, including aux nose and
reeving options.
NOTE: If no boom extension configuration is chosen for
the boom, the following selection will be for
reeving.
Set Boom Extension Length (if installed)
Turn jog dial clockwise and select to determine and choose
the length of the boom extension, including inserts.
1

Manitowoc Grove GRT880 Specifications

General

Brand	Manitowoc
Model	Grove GRT880
Category	Construction Equipment
Language	English