EasyManuals Logo
Home>Manitowoc>Ice Maker>I0320

Manitowoc I0320 User Manual

Manitowoc I0320
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
20 Part Number STH038 5/12
Location of Ice Machine
The location selected for the ice machine must meet
the following criteria. If any of these criteria are not
met, select another location.
The location must be free of airborne and other
contaminants.
Air temperature - Minimum 1.6°C maximum 43°C.
Ice Making Water Inlet - Water Pressure must be
at least 1.38 bar, but must not exceed 5.52 bar.
The location must not be near heat-generating
equipment or in direct sunlight and protected from
weather.
The location must not obstruct air flow through or
around the ice machine. Refer to chart for
clearance requirements.
The ice machine must be protected if it will be
subjected to temperatures below 0°C. Failure
caused by exposure to freezing temperatures is
not covered by the warranty. See “Removal from
Service/Winterization”.
!
Warning
Do not obstruct machine vents or openings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc I0320 and is the answer not in the manual?

Manitowoc I0320 Specifications

General IconGeneral
BrandManitowoc
ModelI0320
CategoryIce Maker
LanguageEnglish

Related product manuals