Part Number STH038 5/12 89
Reset To Factory Defaults
Before starting troubleshooting procedures, reset the
control board to factory defaults to prevent
misdiagnosis. Before resetting to factory defaults do
one of the following:
A. Copy settings to a usb device and flash
settings into the control board when
diagnostics are complete.
B. Write down any customer settings so they
can be re-entered when diagnostics are
complete.
This procedure also resets the password to the factory
default. The default factory password is 1234. To reset
the ice machine to factory defaults use the following
procedure.
1. Ensure that the ice machine’s power is on.
2. Press the Menu button.
3. From the Main menu, use the Down button to
highlight Fact Deflts
4. Press either the Checkmark or right arrow two
times to reset the ice machine. The display will
return to the Set-Up menu and the defaults listed
below will be in affect. Refer to Setup to adjust
settings.
Setting Default
Language English
Time/Date Month/Day/Year/Time
Time Configuration Mo/Day/Yr/24 Hour
Units Fahrenheit/Lbs/Gallons
Ice Clarity Off
LCD Brightness Level 2
Password On Off - Enter Password
Default Password = 1234
Edit Password Off - Edit password
Clean Minder Off
AuCS RunTime Off
Air Filter Minder Off
Water Filter Minder Off
To Next Page
Loading...
Need help?
General