30 Part Number 040005626 5/17
TOGGLE SWITCH OPERATION
Moving the toggle switch to clean will start a Clean
cycle.
• Setting the ice machine to stop after the clean
cycle: Place the toggle switch in the clean
position. The ice machine will stop after the clean
cycle.
• Pausing the cleaning cycle: Move the toggle
switch to Off. Moving the toggle switch to clean will
restart the clean cycle.
• Setting the ice machine to start ice making
after the clean cycle: Place the toggle switch in
the Ice position more than 2 minutes into the clean
cycle.
Step 1 Place the toggle switch in the clean position
after ice falls from the evaporator at the end of a
Harvest cycle. Or, place the toggle switch in the off
position and allow the ice to melt off the evaporator.
Step 2 Remove all ice from the bin.
.
Never use anything to force ice from the
evaporator. Damage may result.
Wear rubber gloves and safety goggles
(and/or face shield) when handling Ice
Machine Cleaner or Sanitizer.
To Next Page
Loading...
Need help?
General