Manitowoc Published 12-10-19, Control # 258-05 3-27
MLC90A-1/MLC100-1 OPERATOR MANUAL OPERATING CONTROLS AND PROCEDURES
Crane Cameras
Table 3-9. Crane Camera Locations
Item Name
1 Camera Points at LOAD from boom point or from jib point
2 Camera Points to REAR (tail swing)
3 Camera Points at DRUM 3/4
4 Camera Points at DRUM 1/2
5 Monitor (see Table 3-10
)
6 Camera Switch (in left front enclosure)
To Next Page
Loading...
