Part Number: 0400060977 Rev. 01 03/19 10
Section 2 Installation
Installation Checklist
Is the ice machine level?
Has all of the internal packing been removed?
Have all of the electrical and water connections been
made?
Has the supply voltage been tested and checked against
the rating on the nameplate?
Are all components installed?
Has the ice machine been installed where ambient
temperatures will remain in the range of 50° - 110°F
(10° - 43°C)?
Has the ice machine been installed where the incoming
water temperature will remain in the range of 50° - 90°F
(10° - 32°C)?
Are all electrical leads free from contact with
refrigeration lines and moving equipment?
Has the owner/operator been instructed regarding
maintenance and the use of Manitowoc Cleaner and
Sanitizer?
Has the owner/operator completed the warranty
registration card?
Has the ice machine and bin been sanitized?
Has this manual been given to the owner/operator?
Is the ice-off-wash switch set to the ice position?
Before Starting the Ice Machine
All Manitowoc ice machines are factory-operated and
adjusted before shipment. Normally, new installations do not
require any adjustment.
To ensure proper operation, follow the Operational Checks.
Starting the ice machine and completing the Operational
Checks are the responsibilities of the owner/operator.
Adjustments and maintenance procedures outlined in this
manual are not covered by the warranty.
n
Warning
PERSONAL INJURY POTENTIAL
Do not operate equipment that has been misused, abused,
neglected, damaged, or altered/modified from that of
original manufactured specifications.