To Next PageTo Next Page
Need help?Do you have a question about the Manusa SMART SELECTOR WITH LCD and is the answer not in the manual?
General| Brand | Manusa |
|---|---|
| Model | SMART SELECTOR WITH LCD |
| Category | Controller |
| Language | English |
The primary display for visual feedback on the selector.
Area for displaying operating mode, menus, and alerts.
Area for displaying data like time and cycle counts.
Area dedicated to showing malfunction icons.
Displays operating parameters and selector status.
Icons representing the door's operating mode.
Button used to confirm selections and save settings.
Button used for navigating options to the right.
Button used for navigating options to the left.
Locks the selector keypad to prevent unintended operations.
Allows the user to modify the Personal Identification Number.
Reduces the door's opening width for specific modes.
Enables viewing or resetting the people counter.
Allows viewing and adjusting the current date and time.
Enables selection of the display language.
Adjusts the display contrast for better readability.
Guides on how to navigate through user menu options.
Enables or disables the reduced opening mode for the door.
Allows the end user to change the Personal Identification Number.
Selects what information is displayed in area 3 of the screen.
Option to change the current date and time settings.
Allows selection of the display language from multiple options.
Resets people and cycle counters to zero.
Modifies the screen contrast value.
Shows the installation date of the door.
Shows the date of the last technical service or intervention.
Shows total cycles since installation date.
Shows total cycles since last service.
Displays the current software version of the SMART selector.
Displays the current software version of the door's main board.
Guides on how to navigate through technical service menu options.
Adjusts the opening speed of each leaf.
Adjusts the closing speed of each leaf.
Adjusts the closing force of each leaf.
Sets the time the door leaves stay open.
Timer to keep lock unblocked before closing.
Adjusts the sensitivity of the interior radar.
Adjusts the sensitivity of the exterior radar.
Selects the display language for technical service.
Adjusts the max opening stroke for reduced opening mode.
Runs the self-adjustment process after installation.
Displays the software version of the selector.
Displays the software version of the door's main board.
Resets the user PIN to the factory default value.
