MAPTEK XR3 - Point Density (Controller)

128
Maptek Scanner Operator Manual - XR3
Point density (Controller)
An example of Controller resolutions achievable by selecting from the
Controller software during scan setup. The point density settings are
shown in the following table.
Point density
setting
Azimuth resolution
(Degrees per step)
Elevation resolution
(Degrees per step)
No. of
Scan lines
per 360°
½
0.4
0.1
900
1
0.2
0.1
1,800
2
0.1
0.1
3,600
4
0.05
0.05
7,200
8
0.025
0.025
14,400
16
0.0125
0.0125
28,800