Maptek, Vulcan, I-Site, BlastLogic, Eureka, PerfectDig, Evolution, Sentry,
CaveLogic, PointStudio and the stylised Maptek M are registered and
unregistered trademarks of Maptek Pty Ltd; Maptek Computación Chile Ltda;
Maptek Computación Chile Ltda, Sucursal Perú; Maptek S de RL de CV; Maptek
Informática do Brasil Ltda and KRJA Systems, Inc. Registered marks are
registered in one or more of the following countries: Australia, Brazil, Canada,
Chile, China, Greece, India, Indonesia, Mexico, Peru, Russia, South Africa,
Spain, the United Kingdom, and the United States of America.
ALL RIGHTS RESERVED. No part of this manual shall be reproduced, stored in
a retrieval system, or transmitted by any means - electronic, mechanical,
photocopying, recording, or otherwise - without written permission from
Maptek™.
No patent liability is assumed with respect to the use of the information
contained herein.
Although every precaution has been taken in the preparation of this manual, the
publisher and author(s) assume no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the
information contained herein.
Copyright
Maptek Scanner Operator Manual - XR3
Revision History
© 2020 Maptek
Trademarks
Due to the nature of the material, some hardware and software products are
mentioned by name. The companies that manufacture the products claim many
of these product names as trademarks. It is not the intention of Maptek™ to
claim these names or trademarks as their own.
Issue 0.51: April 2017
Issue 0.52: April 2017
Issue 0.53: April 2017
Issue 0.8: 15 April 2017
Issue 1.0: 7 May 2018
Issue 1.1: 15 May 2018
Issue 1.2: 24 September 2018
Issue 1.3: 13 December 2018
Issue 1.4: 02 April 2019
Issue 1.5: July 2019
Issue 1.6: August 2019
Issue 1.7: August 2019
Issue 1.8: September 2019
Issue 1.9: October 2019
Issue 2.0: November 2019
Issue 2.1: March 2020
To Next Page
Loading...