Need help?Do you have a question about the Marantec Comfort 220.2 and is the answer not in the manual?
Critical safety guidelines for preventing personal injury and property damage.
Requirements for safe installation, proper usage, and maintenance of the operator system.
Details the standard components included with the operator system and identification labels.
Essential checks for the supply package, garage, and door system before mounting.
Information on which garage door types the system is suitable for.
Step-by-step guide for attaching the motor unit and drive boom, including rail types.
Instructions for mounting the operator on the door and installing the rail.
Detailed steps for mounting the operator system on the ceiling.
Guidance on connecting optional lighting and signal lights to the system.
Instructions and cautions for releasing the door mechanism and reconnecting it.
Information on wiring external buttons, photocells, and antennas to the control unit.
Overview of hand transmitter buttons, battery replacement, and optional accessories.
Step-by-step guide for programming and transferring codes between transmitters.
Instructions for connecting the antenna and power supply to the operator.
Procedure for changing the coding of the hand transmitter.
Identification of control buttons and their functions on the operator unit.
Explanation of LED displays and their meaning in operating mode.
Conditions that must be met before initiating express programming.
Detailed sequence of steps for programming door positions and remote controls.
Process for determining and setting the door's driving power and limits.
Testing the automatic stop/reverse function for safety against obstacles.
Verifying the correct operation of photocells in the door frame and at the closed position.
Diagram illustrating the levels, menus, and parameters for extended functions.
Details on basic functions, operator settings, and automatic closing timers.
Overview of remote control programming and special function parameters.
Configuration options for door speed, soft run, and smart run functions.
Settings for photocells, automatic cut-out, operating modes, and command/impulse transmitters.
Setting intermediate positions, relay output, and reset functions.
Warnings and advice regarding parameter changes and post-reset procedures.
Detailed explanation of settings for relay output functions like signal light.
Description of various reset options for the control unit and safety devices.
Configuration of driving power and speed sensitivity for OPEN and CLOSE operations.
Adjusting the sensitivity of automatic cut-out for safety and obstacle detection.
Configuration of automatic closing timer, door open duration, and warning times.
Settings for the signal light function and its interaction with other timers.
Detailed explanation of timer settings and their operational impact.
How the signal light operates based on door movement and stoppage.
Setting and programming intermediate door positions via remote control.
Configuring impulse inputs and lighting duration for special functions.
Detailed settings for OPEN and CLOSE speeds, including soft run adjustments.
Configuration of smart run functions and soft run positions for door movement.
Configuration options for photocell operation and recognition.
Settings for automatic cut-out, operating modes, and command/impulse transmitters.
How photocells affect door movement (stops, reverses).
Configuration of automatic cut-out behavior and general operating modes.
How direction command transmitters control door movement.
How impulse command transmitters control door movement and sequences.
Solutions for issues related to LED indicators and power supply problems.
Diagnosing and resolving issues with impulse buttons and hand transmitter signals.
Addressing problems caused by interrupted photocells or incorrect programming.
Solutions for errors related to programming termination, reference points, and movement stiffness.
Diagnosing issues with external photocells and automatic cut-out power sensors.
Addressing undervoltage, overload, and irregular door movement issues.
Solutions for defective electronics, shorting plug removal, and circuit interruptions.
Detailed electrical data, power consumption, and mechanical properties of the operator.
Lists standard components, optional accessories, and key safety/operational features.
Statement confirming compliance with EC Machinery Directive and related standards.
Information on the availability of technical documentation and product production dates.
Fields for product name, gate, and operator designation for conformity declaration.
Declaration of conformity with relevant EC directives for product market entry.
General| Manufacturer | Marantec |
|---|---|
| Model | Comfort 220.2 |
| Type | Garage Door Opener |
| Motor Type | DC |
| Remote Control | Yes |
| Power Consumption | 220W |
| Safety Features | Obstacle detection |
| Warranty | 2 years |
To Next Page