Need help?Do you have a question about the Marantec Comfort 260 and is the answer not in the manual?
Defines the intended purpose of the operator system for garage doors.
Identifies qualified personnel for installation, operation, and servicing.
Outlines warranty conditions, emphasizing adherence to manual instructions.
Lists checks for supply package, garage, and door system before installation.
Details the physical mounting and connection of the drive unit to the door.
Explains wiring for external control devices like photocells and buttons.
Final steps including affixing warning signs and checking door clearance.
Identifies and explains the function of control buttons and display indicators.
Describes the meaning of various symbols shown on the operator's display.
Guides through initial setup for door positions and remote control pairing.
Details checks for driving power and automatic cut-out functions.
Explains how to configure advanced features and parameters for the operator.
Instructions on how to operate the door using the provided hand transmitter.
Details on how to manually release the door and associated safety precautions.
Troubleshooting steps for issues not indicated by fault messages on the display.
Addresses problems where the operator does not respond to button or transmitter input.
Explains how to resolve issues where the photocell causes unexpected door movement.
Details common fault numbers, their causes, and recommended corrective actions.
General| Motor Type | DC |
|---|---|
| Manufacturer | Marantec |
| Type | Garage Door Opener |
| Model | Comfort 260 |
| Lighting | LED |
| Drive Type | Chain Drive |
| Safety Features | obstacle detection |
| Warranty | 2 years |
To Next Page