Need help?Do you have a question about the Marantec Comfort 360 and is the answer not in the manual?
Safety notices indicating potential danger levels: severe injury or death.
Safety notices indicating potential danger levels: severe injury.
Safety notices indicating potential danger levels: slight or moderate injuries.
Safety notices indicating potential damage to property or product.
Symbols indicating checks and cross-references to other information.
Specifies the authorized applications and limitations for the operator system.
Defines the qualifications required for installation and operation personnel.
Details warranty terms, conditions, and exclusions for the product.
Outlines necessary preparatory steps before commencing the installation process.
Step-by-step guide for physically mounting the operator drive onto the door system.
Instructions for wiring and connecting external control devices to the operator.
Identifies and explains the functions of the operator's control buttons and displays.
Explains the meaning of various indicators and symbols on the operator's display.
Guides through the initial programming sequence for setting up the operator system.
Details the process for resetting operator parameters to their original factory configuration.
Configures the operator's driving power based on door movement characteristics.
Verifies the safety feature that stops or reverses the door upon encountering an obstacle.
Ensures the photocell safety device is correctly installed and operational.
Step-by-step guide for configuring advanced operator functions and settings.
Lists and categorizes all available special function parameters and their levels.
Adjusts core operator parameters like driving power and cut-out sensitivity.
Configures automatic door closing parameters such as open duration and warning time.
Instructions for programming remote control functions like intermediate positions and OPEN/CLOSE.
Sets the operator's lighting function for activation or deactivation.
Configures the input terminal for impulse signals and specific functions.
Sets up programmable inputs via the XW81 terminal for various functions.
Adjusts door speeds, including soft run and soft start times.
Guides on routine checks, fault indicators, and servicing intervals.
Configures system-wide settings like photocell and closing edge behavior.
Adjusts the sensitivity and behavior of the automatic safety cut-out.
Sets different operating modes like Deadman or Press-and-release for door control.
Configures how direction command transmitters interact with the operator system.
Determines the behavior of impulse command transmitters for door activation.
Configures the 'back jump' feature for releasing tension in the CLOSED door position.
Explains how to operate the garage door using the supplied hand transmitter.
Guides on how to transmit a code from a master transmitter to a new one.
Details the process for changing or re-coding the hand transmitter.
Instructions on how to replace the battery in the hand transmitter.
Provides guidelines for cleaning and maintaining the operator system's exterior.
Diagnoses and resolves issues that do not trigger specific fault codes on the display.
Addresses issues with signal reception, communication links, and related faults.
Diagnoses faults related to photocells, obstructions, and door movement errors.
Troubleshoots faults concerning sensors, motor operation, and system errors.
Provides detailed specifications, dimensions, and performance data for the operator system.
Certifies conformity with EC directives regarding machinery and construction products.
Declares that the product complies with relevant EC directives for market placement.
General| Voltage | 120V AC |
|---|---|
| Operating Voltage | 120V AC |
| Security | Rolling code technology |
| Type | Garage Door Opener |
| Drive | Belt Drive |
| Maximum Door Height | 7 feet |
| Lighting | LED |
| Safety Features | photoelectric sensors |
| Drive Type | Belt Drive |
| Remote Controls | 2 included |
| Battery Backup | Not included |
| Warranty | Lifetime motor warranty |
To Next Page