Marantec Comfort 220 - User Manual

Comfort 220
Einbau- und Bedienungsanleitung
Garagentor-Antrieb
Installation and Operating Instructions
Garage Door Operator
Notice de montage et d'utilisation
Opérateur pour porte de garage
Montagehandleiding en gebruiksaanwijzing
Garagedeuraandrijving
Istruzioni per il montaggio e l'uso
Motorizzazione per porte da garage
D
GB
F
NL
I
Bitte sorgfältig aufbewahren.
Keep these instructions for later reference.
A conserver soigneusement.
Deze handleiding zorgvuldig bewaren.
Da conservare con cura.

Summary

Installation and Operating Instructions (GB)

1 Preparation

2 Connection of boom to motor unit

Instructions for connecting the boom to the motor unit, including adapter sleeve and clamping.

4 Attaching suspension cramps to the boom

Installation of lintel joining plate

Steps for installing the lintel joining plate to protect the pull element.

6 Disengagement of carriage

7 Garage door operator for up-and-over doors

Instructions for installing the operator on up-and-over type garage doors.

8 Garage door operator for sectional doors

9 Garage door operator for retractable up-and-over door

Installation guide for operators on retractable up-and-over doors.

Fitting the adapter arm

Steps for fitting the adapter arm onto the door.

10 Suspension of motor unit

Suspension of boom

Method for suspending the boom using support plates and cramps.

11 Site requirements

Considerations for mounting the motor unit and boom according to site conditions.

12 Installation of bulb

Instructions for installing the light bulb, including safety precautions.

13 Quick release

Procedure for quick release mechanism and manual operation safety.

14 Removing the view panel

15 Electronic control unit

Overview of the electronic control unit, its symbols, and functions.

Fuses

Information on the types and location of fuses within the unit.

17 Hand transmitter

Hand transmitter: Learn coding

Step-by-step guide for learning and transferring coding between hand transmitters.

18 Hand transmitter: Learn coding (if necessary)

Altering the code

Procedure for changing the remote control code if the transmitter is lost.

19 Electronic aerial

Connecting external control elements

How to connect external control elements like buttons or key switches.

21 Initial programming of Marantec Garage Door Operators

Learning of operation force

Procedure for the operator to learn the door's operational force.

Testing

How to test the operator's functions after programming.

2 nd Programming level

Increasing or lowering of the operators pull force door open

Adjusting the force limitation for the 'door open' direction.

Increasing or lowering of the operators push force door closed

End of programming.

Final step to complete the programming process.

22 Programming the electronic control unit

To display the electronic control unit fault message

How to access and display fault messages from the control unit.

Programming table basic level

1: Programming the OPEN travel limit

Setting the 'OPEN' travel limit for the garage door.

2: Programming the CLOSE travel limit

Setting the 'CLOSE' travel limit for the garage door.

Programming table basic level (continued)

3: Programming of remote control

Programming the remote control (hand transmitter).

4: Completing the programming process

Final steps to complete the programming process.

Programming table level 2

1: Programming an external photocell

Programming the external photocell function.

2: Programming the OPEN automatic cut-out

Setting the automatic cut-out for the 'OPEN' direction.

Programming table level 2 (continued)

3: Programming the CLOSE automatic cut-out

Setting the automatic cut-out for the 'CLOSE' direction.

4: Programming Offset automatic learned force limitation

Adjusting offset for learned force limitation.

Programming individual functions, e.g. the CLOSE automatic cut-out

Inserting the view panel

Instructions for inserting the view panel.

Cable connecting plan

Comfort 220 circuit diagram

Electrical circuit diagram for the Comfort 220 unit.

27 Test Instructions - only for the specialist -

Troubleshooting Guide

Guide to identify and resolve common faults and error messages.

27 Test Instructions - continued

Initial operation

Procedures for initial operation and periodic checks of the system.

Maintenance

Key points to ensure trouble-free operation and regular checks.

29 Technical data

Garage Door Operator Comfort 220

Detailed technical specifications for the Comfort 220 operator.

Manufacturers Declaration

EC Conformity Declaration

Marantec Comfort 220 Specifications

General

Voltage	115 V
Frequency	60 Hz
Remote Controls Included	2
Drive	Chain
Max. Door Area	84 sq. ft.
Security	Rolling Code