Marantz 40n - Connect the Antennas

2
EN
FR
ES
Setup
AUDIO IN
AUDIO IN
AUDIO OUT PRE OUT POWER AMP IN
HDMI ARCNETWORK
CD LINE
PHONO SIGNAL GND
RECORDERRECORDER SUBWOOFER
5V/1A
IN
REMOTE CONTROL
OUT
SPEAKERS
AC IN
Bluetooth / Wi-Fi
ANTENNA
Bluetooth / Wi-Fi
ANTENNA
DIGITAL AUDIO IN
OPTICALCOAXIAL
q w e
Connect the antennas
HDMI ARCNETWORK
PHONO SIGNAL GND
5V/1A
SPEAKER
Bluetooth / Wi-Fi
ANTENNA
DIGITAL AUDIO IN
OPTICALCOAXIAL
Optional
If you are connecting MODEL 40n to a wired network, connect an Ethernet cable
(not included) between the ampli er and your router. Do not connect the Ethernet
cable if you are connecting the ampli er to a wireless network.
NOTE
The antennas are required for both Bluetooth and Wi-Fi functions.
Place the antenna squarely over the antenna terminal in the
upper-left and upper-right corner of the rear panel.
1
Turn the antenna clockwise until it is fully connected.
Do not over tighten.
2
Rotate the antenna upwards for the best possible reception.
3
PrintingColor:Black