A
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 29)
A
Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
B
Turn clockwise until the antennas is fully connected.
C
Rotate the antenna upwards for best reception.
B
USB port (T)
This is used to connect USB storages (such as USB flash drives).
(v p. 27)
C
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 28)
D
SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 23)
E
HDMI connector (HDMI ARC)
Used to connect an ARC function-compatible TV. (v p. 25)
F
DIGITAL AUDIO IN connectors
Used to connect devices equipped with digital audio output connectors.
(v p. 25)
G
Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 20)
Contents
Connections Playback Settings Tips Appendix
12
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
