Do you have a question about the Marantz 4270 and is the answer not in the manual?
Total Harmonic Distortion | 0.3% |
---|---|
Tuning Range | FM, MW |
Damping Factor | 50 |
Input Sensitivity | 1.8mV (MM), 180mV (line) |
Power Output | 70 watts per channel into 8Ω (stereo) |
Signal to Noise Ratio | 75 dB (MM), 90 dB (line) |
Speaker Load Impedance | 4 to 16 ohms |
Semiconductors | Diodes: 48 |
Procedure for aligning AM frequency range and tracking.
Procedure for aligning the AM signal strength meter.
Procedure for aligning stereo separation in the FM tuner.
Procedure for aligning the FM muting circuit.
Steps for adjusting Dolby FM preset level controls.
FM performance parameters including sensitivity, selectivity, and distortion.
AM performance parameters including sensitivity, selectivity, and distortion.