Do you have a question about the Marantz 74 PM40 and is the answer not in the manual?
Procedure to adjust idling current, specifying test points and target values.
Instructions for changing the unit's supply voltage between 220V and 240V.
Procedure to adjust idling current, specifying test points and target values.
Instructions for changing the unit's supply voltage between 220V and 240V.
| Frequency response | 10Hz to 50kHz |
|---|---|
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Weight | 8.5 kg |
| Total harmonic distortion | 0.03% |
| Signal to noise ratio | > 100 dB |
| Power output | 40W per channel into 8Ω |
Loading...