o
Center
Set the presence and size of the center speaker.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when a center speaker is not
connected.
o
Subwoofer
Set the presence of a subwoofer.
4 spkrs:
Use four subwoofers.
3 spkrs: Use three subwoofers.
2 spkrs: Use two subwoofers.
1 spkr
(Default):
Use only one subwoofer.
None:
Select when a subwoofer is not
connected.
0
When “Subwoofer” is set to “None” and you set “Front” to “Small”, “Subwoofer”
is automatically set to “1 spkr”.
o
Subwoofer Mode
When you are using multiple subwoofers, set the audio to be output
from the subwoofer.
Standard
(Default):
All subwoofers output LFE signals and
bass below the crossover frequency of all
the speakers.
Directional:
All subwoofers output LFE signals. In
addition, each subwoofer outputs bass
below the crossover frequency of
speakers that are placed near them.
0
This can be set when “Subwoofer” is set to “4 spkrs”, “3 spkrs” or “2 spkrs”.
Contents Connections Playback Settings Tips Appendix
226
Front panel Display Rear panel Remote Index
To Next Page
Loading...
