o
Contents
Speaker installation 37
Connecting a power amp 43
Connecting a TV 65
Connecting a playback device 68
Connecting a USB memory device to the USB port 75
Connecting FM/AM antennas 76
Connecting to a home network (LAN) 78
Connecting an external control device 80
Connecting the power cord 85
NOTE
0
Do not plug in the power cord until all connections have been completed.
However, when the “Setup Assistant” is running, follow the instructions in the
“Setup Assistant” (page 9 in the separate “Quick Start Guide”) screen for making
connections. (During “Setup Assistant” operation, the input/output connectors do
not conduct current.)
0
Do not bundle power cords together with connection cables. Doing so can result in
noise.
o
Cables used for connections
Provide necessary cables according to the devices you want to
connect.
Speaker cable
Subwoofer cable
HDMI cable
Coaxial digital cable
Optical cable
Audio cable
XLR cable
LAN cable
Contents Connections Playback Settings Tips Appendix
36
Front panel Display Rear panel Remote Index
To Next Page
Loading...
