General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English / Français / Español (Default: English)
0
“Language” can also be set up by the following operation. However, the menu
screen is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same time
for at least 3 seconds.
“zVideo Format <NTSC>” appears on the display.
2. Press cursor Down on the main unit twice.
“zGUI Language <ENGLISH>” appears on the display.
3. Use the main unit’s cursor Left or cursor Right and set the language.
4. Press the main unit’s ENTER to complete the setting.
Owner's Manual
Shows URL and QR code to access the online Owner's Manual from your
mobile device.
Bluetooth Transmitter
Sets this unit's Bluetooth transmitter.
Set to use Bluetooth headphones to listen to audio playing in the MAIN
ZONE.
o
Transmitter
Enables or disables the Bluetooth transmitter.
On: Enables the Bluetooth transmitter feature.
Off
(Default):
Disables the Bluetooth transmitter
feature.
o
Output Mode
Selects the audio output method.
Bluetooth + Speakers
(Default):
Audio is output to Bluetooth headphones
and main zone speakers.
Bluetooth Only:
Audio is output to Bluetooth headphones
only.
o
Connected device
Displays the Bluetooth device connected to this unit.
Contents
Connections Playback Settings Tips Appendix
252
Front panel Display Rear panel Remote Index
To Next Page
Loading...
