Marantz CD-17 - Page 10

Listening only to the desired tracks by omit-
ting unwanted tracks (delete programming)
(Example: To program the tracks on a 14-track disc with the exception of
track numbers 3 and 7)
1. Press the button in stop mode and, when the PROGRAM
indicator starts to flash, press the (CANCEL) button. The total
number of tracks and total playing time of the disc will be displayed.
(Display example: The total playing time is 59 minutes 15 seconds)
Flashes.
TRACK TOTAL
ILicg.
a OS
TIME PROGRAM
ma G4: tS
1234 5 6 78 § 1011 12 13 14
2. Select the unwanted tracks using the numeric buttons or the [_ >>] or
[_te<_] button.
(Display example: Track number 3 is selected first and the total playing
time of 13 tracks becomes 55 minutes 46 seconds)
Flashes.
TRACK TOTAL
Looe Age
6 5:4b
12 4 5 6 78 9 1011 12 13 14
TIME PROGRAM
I
The number of the deleted track goes out.
3. After having selected and deleted all of the unwanted tracks, press the
button or button.
The PROGRAM indicator status changes from flashing to continuously
lit, indicating that the program is completed.
(Display example: The total playing time of the 12 tracks, omitting track
numbers 3 and 7, is 51 minutes 16 seconds)
Lights up.
TRACK TOTAL
be pe
J tf (0
TIME PROGRAM
a
12 456 & 9 101112 13 14
4, Press the button, The tracks except for the deleted tracks will
be played in the order of the track numbers.
® When the tracks have been programmed by programming or delete
programming, it is also possible to begin program playback immedi-
ately by pressing the [PLAY] button or button. (For
random playback, refer to page 8.)
® Take note of the following points when programming tracks by
programming or delete programming.
When selecting track numbers 1 to 9 using numeric buttons from a
disc containing 10 or more tracks (when selecting track number 3
after track number 2, for example), press 3 more than 1.5 seconds
after pressing 2.
When using numeric buttons to select track number 10 or higher on
a disc containing 10 or more tracks (for example when selecting track
number 13), press 3 within 1.5 seconds of pressing 1.
When using numeric buttons to select track numbers on a disc
containing no more than 9 tracks (when selecting track number 5 after
track number 4, for example), press 5 more than about 0.5 second
after pressing 4.
When programming track numbers using the [>] and [ee]
buttons, press buttons with intervals of less than 1 second.
To check the programmed contents:
Press the button during programming or program playback.
If itis pressed during “programming”, the programmed track numbers will
be displayed sequentially in the order they have been programmed. If it is
pressed during “delete programming”, the deleted track numbers will be
displayed.
To erase some of the programmed tracks:
1. Press the button to display the programmed track numbers
sequentially in the order in which they have been programmed.
2. When the track number to be erased from the program is displayed,
press the button immediately.
The track number indicator of the track erased from the program goes
out.
To re-incorporate in the program a track which has been deleted in
“delete programming”:
1.Pressthe (RECALL) button during delete programming to display the
deleted track numbers sequentially in the order in which they were -
deleted.
2. When the track number to be added to the program is displayed, press
the (CANCEL) button immediately.
The track number indicator of the track added to the program lights up.
To erase the entire program:
During program playback, press the [STOP] button twice. In stop mode,
press the [STOP] button once.
© The program is also erased by pressing the [OPEN/CLOSE] button to
open the disc tray.
To add tracks to the program:
In stop mode with the program stored in the memory (that is, with the
PROGRAM indicator lit up), press the button. The PROGRAM
indicator starts flashing and more tracks can be added to the program.
Q&A
¢ How many tracks is it possible to program?
Up to 30 tracks can be included in the program. With delete program-
ming, up to 30 tracks can be omitted from the program.
* Isit possible to change from programming to delete programming
or vice versa?
No.
* How do you play programmed tracks repeatedly?
Press the (REPEAT) button once. The REPEAT indicator lights up and
the program playback will be repeated.
¢ How do you play programmed tracks in a random order?
Press the button during program playback or in stop mode.