Marantz CD6005 - Audio Output Troubleshooting; No Sound During CD Playback

33
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Playing files
1
Load a CD-R or CD-RW disc containing music files
in the MP3, WMA or AAC formats into the disc tray
(vpage58).
• Press 5 on the unit to open/close the disc tray.
2
Press MODE to select the folder mode or all mode.
n About the display
• When “Folder mode” is selected
“FLD” indicator lights.
All the files in the selected folder are played.
• When “All mode” is selected
“FLD” indicator turns o.
After the selected folder and files are played, all the files in all
the folders are played.
3
Use ui to select the folder to be played.
4
Use o p to select the file to be played.
5
Press 1.
Playback starts.
Operation buttons Function
1
Playback
3
Pause
2
Stop
8 9
Skip to previous track / Skip to next track
(Press and hold)
Fast-reverse / Fast-forward
ui
Folder select
o p
File select
0 – 9 Select the track
MODE
Switch to Folder playback mode
• Playing back only within the selected
folder.
RANDOM
Random playback
REPEAT
Repeat playback
• Switching between All-track repeat and
Single-track repeat.
REPEAT A-B
A-B repeat playback (vpage29)
TIME
Track elapsed time and Track remaining
time
%
• The folder and file numbers are set automatically when the disc is loaded.
NOTE
• Programmed playback is not possible with MP3/WMA/AAC discs.
• Copyright-protected files cannot be played. (The “Not Support” is displayed.)
Note that depending on the software used for burning and other conditions, some
files may not play or display correctly.