Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
2 Power does not turn on / Power is turned o
Symptom Cause / Solution Page
Power is not turned on. • Check whether the power plug is correctly inserted into the power outlet.
• This unit is in standby mode. Press X on the unit or POWER X on the remote control.
23
25
Power automatically turns o. • The Auto Standby mode is set. The Auto Standby mode switches the unit to standby mode
when the unit is not operated for approximately 30 minutes. To disable Auto Standby mode,
set “Auto Standby” on the menu to “O”.
46
To Next Page
Loading...
