o
Checking the order of the programmed tracks
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
o
To clear the last track programmed
In the stop mode, press CLEAR.
The last track programmed is cleared each time the button is pressed.
o
Clearing the all programmed track
In the stop mode, press PROG.
Skipping tracks you don’t want to hear
(Delete program playback)
A maximum of 25 tracks can be programmed for delete program playback.
1
During stop mode, press PROG, and then press
CLEAR.
“Delete Program” is displayed on the display.
2
Use 0 – 9 to select the tracks you want to skip.
GExampleH
If you want to skip the 3rd and 12th tracks, press 3 and then press 1
and 2.
3
Press 1.
Playback starts, and the selected tracks are skipped.
o
Checking details of the delete program
In the stop mode, press 9.
The skipped tracks are shown in order in the display each time 9 is
pressed.
Contents Connections Playback Settings Tips Appendix
31
Front panel Display Rear panel Remote Index
To Next Page
Loading...
