Adjusting the Volume in ZONE2
o
Adjusting the volume
1
Press Z2 to set the operating zone to ZONE2 with the
remote control.
The indicator for the selected zone is lit.
2
Use VOLUME no to adjust the volume.
0
At time of purchase, “Volume Limit” is set to “70 （–10 dB）”.
(v p. 217)
0
Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust
the volume.
o
Turning off the sound temporarily (Muting)
1
Press Z2 to set the operating zone to ZONE2 with the
remote control.
The indicator for the selected zone is lit.
2
Press MUTE :.
The sound is reduced to the level set at “Mute Level” in the menu.
(v p. 218)
0
To cancel mute, either adjust the sound volume or press
MUTE : again.
Contents Connections Playback Settings Tips Appendix
151
Front panel Display Rear panel Remote Index
To Next Page
Loading...
